Features
Overview
LED Indicators The factory incandescent turn signals on your vehicle illuminate in a slow glow taking a moment to turn off and on With replacement LED bulbs you can immediately update your vehicle with the instant onoff blinking of modern LEDs This instant activation adds a modern and distinct look to your vehicle
Brightness Your vehicle uses a 3157 dualfilament bulb They light up with low power as parking lights then they get brighter when the turn signal or hazards are activated Diode Dynamics bulbs are designed to match the factory brightness ratio so there is enough distinction between low and high brightness levels As with all Diode Dynamics LED bulbs these turn signal bulbs are rated with accurate measured lumen figures not calculations or guesses
Switchback These bulbs illuminate in a bright white for the low power setting for your running/parking light then switch to intense amber when the turn signals are activated When the turn signal is switched off they return to the original white output Please note in order to properly see the white you must have clear reflectors/lenses over the turn signal bulb
Reduced Load If you experience hyperblinking the most triedandtrue method to correct this is to add resistors sold separately Since a 6ohm resistor uses about the same power as a standard turn signal bulb these can be used on any vehicle but does require tapping factory signals One resistor is needed to replace each turn signal bulb
You will be first to know about our newest products, discounts and special events.