$0.00
  1. Home
  3. Parts & Components
  5. Engine
  7. Camshafts
  9. Engine Camshaft & Lifter Kit

Edelbrock 7112 Performer-Plus Camshaft Kit For Small-Block Oldsmobile 350-403 V8
Part # 7112

Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine.

Edelbrock 7112 Performer-Plus Camshaft Kit For Small-Block Oldsmobile 350-403 V8

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered manufactured and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.; Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered manufactured and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.


$461.95

ADD TO CART

QUESTIONS?
INSTRUCTIONS

Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high-performance's street applications Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 12"

cust-care

Have a question?

Ask one of our specialists.

(678) 674-4798



Recently Viewed Products

Edelbrock 8163 Heater Hose End Fitting - 90° with 3/8\" NPT and 1/2\" Barb.

$33.95

Edelbrock 1034 94 Carburetor Straight Throttle Linkage Kit for Tripple Carb Set-up

$147.95

Edelbrock 8184 Heater Hose End Fitting - Straight with 1/2\" NPT and 3/4\" Barb.

$31.95

Edelbrock 15872 3.00\" 8-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

$58.95

joinouremail list

$0.00