Edelbrock 7132 Performer-Plus Camshaft Kit For AMC 343-401 V8
Part # 7132

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine.

Have a question?

Ask one of our specialists.

(678) 674-4798

Edelbrock 7132 Performer-Plus Camshaft Kit For AMC 343-401 V8

Part # 7132

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine.

Review it Love it

Compare

Wishlist

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered manufactured and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.; Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered manufactured and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.

$449.95

ADD TO CART

QUESTIONS?

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine. The camshaft works well with high-performance's street applications Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .520" - Lift @ Valve Exhaust: .544" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"

Have a question?

Ask one of our specialists.

(678) 674-4798

Edelbrock 7132 Performer-Plus Camshaft Kit For AMC 343-401 V8
Part # 7132

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine.

Have a question?

Edelbrock 7132 Performer-Plus Camshaft Kit For AMC 343-401 V8

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine.

$449.95

$449.95

Have a question?

Recently Viewed Products

Edelbrock 41123 E-Force Supercharger Aluminum Coil Covers for 2005-13 Corvette

$527.95

Edelbrock 2814 Super Victor Vortec Bowtie Intake Manifold Small-Block Chevy

$552.95

Edelbrock 1420 Edelbrock Primary Metering Jet - .077\" (Qty 2)

$15.95

Edelbrock 8722 Carburetor Spacer #8722 Divided Center 1/2in Thick

$52.95

Edelbrock 9772 Exhaust Valve for #60797 Cylinder Heads

$37.95

Edelbrock 2790 Torker Holden 253-308 Intake Manifold

$562.95

Edelbrock 1474 Choke Cap Kit for Performer & Thunder Series AVS Carburetors

$46.95

Contact