$0.00
49 - 72 of 340 Products
V-Drop Technology - This unique AutoMeter feature utilizes a patented process to automate the measurement of voltage drop in the charging circuit during starter engagement to ensure vehicle systems are operating at peak performance.. This test occurs with minimal operator effort in the short period of time required for the engine to crank over and fire.. Autometers V-Drop Technology Prevents The Need To Connect Additional Probes And/Or Disable Ignition Or Fuel Systems To Engage In Excessive Engine Crank Periods.. In the event that your AutoMeter tester equipped with V-Drop detects an issue it will guide the operator through the diagnosis to identify which part of the circuit is causing the excessive voltage drop.

Battery Extenders will safely keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated which is the main reason for premature battery failure.

Capacity/Volts Display: Alpha Numeric Bar Graph: 10 color-coded LEDs

Slow charge option available.

Easy-Link communication to PC via USB

Plug and Play with AutoMeter Electronic Programmable Speedometers.. Lightning quick 10 Hz signal update rate is the fastest available.. Fully sealed and paintable magnetic micro antenna (Dimensions: 1.472" x 1.339" x 0.508"). Includes 16 ft. of wiring for plenty of mounting versatility.. GPS module is fully sealed against water and dust. Includes 6.5 ft. wiring harness. Case Dimensions: 3" (6" w/ wiring &. connectors) x 2.5" (4" w/ mounting tabs) x 1". One touch calibration process takes only seconds for most other electronic speedometers.

Includes 4 magnets sensor pickup and universal bracket. Includes mounting hardware and installation instructions

Solid state data acquisition quality sensor. 8ft motorsport grade harness

Solid state data acquisition quality sensor. 8ft motorsport grade harness

Run Time Based on Default (75%) Gauge Brightness (AutoMeter EEG) - 1 Gauge - Approx. 18 hours. 2 Gauges - Approx. 9 Hours. 3 Gauges - Approx. 5 Hours. 4 Gauges - Approx. 4 Hours. Charge statistics - Fast Charger 14.9VDC. Float Charge 13.8VDC. Not for use with any other batteries. Do not expose to underhood temperatures. 12v 1.4 AH. 300mA. 110 - 240 VAC 5060Hz

Sensor Body Material - Brass. Thread size - 1/8" NPTF. Includes 3/8" NPT and 1/2" NPT adapter bushings.

Maintains cable rotation direction. 1:1 Ratio. 5/8" -18 Thread Male to Female. .104 Square Drive. 1.16" x 2.15" x 2.5". Weight: 10 oz. Heavy duty lightweight aluminum construction with black powder coat finish

Alternator adapters that make test equipment leads easier to attach on the vehicle.

Part# BCT-200J

V-Drop Technology - This unique AutoMeter feature utilizes a patented process to automate the measurement of voltage drop in the charging circuit during starter engagement to ensure vehicle systems are operating at peak performance.. This test occurs with minimal operator effort in the short period of time required for the engine to crank over and fire.. Autometers V-Drop Technology Prevents The Need To Connect Additional Probes And/Or Disable Ignition Or Fuel Systems To Engage In Excessive Engine Crank Periods.. In the event that your AutoMeter tester equipped with V-Drop detects an issue it will guide the operator through the diagnosis to identify which part of the circuit is causing the excessive voltage drop.

Part# BEX-5000

Battery Extenders will safely keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated which is the main reason for premature battery failure.

Part# BT-300S

Capacity/Volts Display: Alpha Numeric Bar Graph: 10 color-coded LEDs

Part# 5289

Plug and Play with AutoMeter Electronic Programmable Speedometers.. Lightning quick 10 Hz signal update rate is the fastest available.. Fully sealed and paintable magnetic micro antenna (Dimensions: 1.472" x 1.339" x 0.508"). Includes 16 ft. of wiring for plenty of mounting versatility.. GPS module is fully sealed against water and dust. Includes 6.5 ft. wiring harness. Case Dimensions: 3" (6" w/ wiring &. connectors) x 2.5" (4" w/ mounting tabs) x 1". One touch calibration process takes only seconds for most other electronic speedometers.

Part# 5290

Includes 4 magnets sensor pickup and universal bracket. Includes mounting hardware and installation instructions

Part# 9217

Run Time Based on Default (75%) Gauge Brightness (AutoMeter EEG) - 1 Gauge - Approx. 18 hours. 2 Gauges - Approx. 9 Hours. 3 Gauges - Approx. 5 Hours. 4 Gauges - Approx. 4 Hours. Charge statistics - Fast Charger 14.9VDC. Float Charge 13.8VDC. Not for use with any other batteries. Do not expose to underhood temperatures. 12v 1.4 AH. 300mA. 110 - 240 VAC 5060Hz

Part# 990344

Sensor Body Material - Brass. Thread size - 1/8" NPTF. Includes 3/8" NPT and 1/2" NPT adapter bushings.

Part# 990414

Maintains cable rotation direction. 1:1 Ratio. 5/8" -18 Thread Male to Female. .104 Square Drive. 1.16" x 2.15" x 2.5". Weight: 10 oz. Heavy duty lightweight aluminum construction with black powder coat finish

Part# AC-27

Alternator adapters that make test equipment leads easier to attach on the vehicle.

Filters

×
joinouremail list

$0.00